VOE transmisión final para Volvo EC290 EC290B excavadora midi
Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor
+86 189 289...
+86 189 2896 5241
China
Product Overview
The Volvo EC290 and EC290B are 29‑ton excavators built for heavy earthmoving, quarry loading and large‑site excavation, where a single lost hour of mobility costs real money. The axial piston motor and planetary reducer under each track — covered by Volvo part numbers VOE 14509996, VOE 14521839 and VOE 14522919 — is what keeps them moving: turning hydraulic flow into the slow, powerful rotation pulling such heavy frames across ground. On machines this size, drive wear is felt across the whole operation. One track lags, the machine pulls off line on level ground, the drive housing runs hot after a shorter run than it should, and a deepening note comes from the track motor. Running on scores the piston group and reduction gears further. This OEM‑grade drive is built as one matched motor‑and‑reducer assembly, covering both the EC290 and EC290B, so the worn unit comes off and the new one bolts straight back on.
Core Advantages
1. Three Volvo references, one matched drive
The three VOE numbers cover build variants across the EC290 and EC290B range. We confirm the correct unit against your machine serial number, so workshops stocking this drive can support both models without guessing.
2. Output torque matched to a 29‑ton machine
These excavators carry real weight and meet real resistance on grades and broken ground. Hardened gears and piston surfaces hold the sprocket torque the tracks need to push and climb, without the laboured travel that undersized replacements produce.
3. Sealed for long hours on quarry sites
Heavy Volvo machines work through long shifts in quarry dust, mud and standing water. Fitted output‑shaft and housing seals keep grit out of the motor and reducer — the protection that decides whether the drive lasts its service life.
4. A complete, tested unit for fast turnaround
Motor and reducer arrive pre‑assembled and bench‑checked, so the whole drive swaps in one operation. No sourcing separate parts, no mid‑job mismatches — critical when a stationary 29‑ton machine is losing money by the hour.
5. OEM‑spec quality at a practical repair cost
An original Volvo final drive exchange carries a premium. This OEM‑grade unit matches the original fit and performance at a more workable price, with sample and bulk supply for fleets running several of these machines.
Manufacturing & Quality Control
The OEM‑grade route follows controlled specifications: material certification, precision machining of housings and gears, case hardening of wear surfaces and clean assembly. Each completed drive runs on a test rig to verify output torque, internal leakage and running noise before release, and only passing units are packed. Full preservation coating, moisture sealing and shock‑absorbing export casing protect the assembly during transport.
Frequently Asked Questions
Q1: Which Volvo reference suits my machine?
A: Check the tag on your existing drive against the three VOE numbers and share your machine serial number. Build variants differ between the EC290 and EC290B, so we confirm the correct unit before dispatch.
Q2: Is this the complete motor and reducer?
A: Yes — the listing covers the full axial piston motor with planetary reducer as one assembly, ready to bolt on. Separate components can be checked on request.
Q3: What symptoms point to drive wear?
A: Uneven track speed, pulling to one side on level ground, a hot or noisy track motor and tracks that fail to pull under load. Inspect early, before debris spreads through the travel circuit.
Q4: What is the warranty position?
A: Manufacturing and material defects are covered. Damage from contaminated oil, debris in the motor, track obstruction, overload or incorrect installation is excluded; follow the Volvo service manual for fitting and bleeding.