TyreON TPH60T-4 Air hydraulic jack 60 Tons - Minimum height 15 cm gato hidráulico nuevo
≈ 11.720 BOB
Akersloot6460 km to "United States/Columbus"
Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor
+31 6 537...
Mostrar
+31 6 53701658
+31 72 540...
Mostrar
+31 72 540 1002
Países Bajos 
80.000 kg
Países Bajos, Akersloot
35.000 kg
Países Bajos, Akersloot
50.000 kg
Países Bajos, Akersloot
3.200 kg
Países Bajos, Akersloot
80.000 kg
Países Bajos, Akersloot
80.000 kg
Países Bajos, Akersloot
50.000 kg
Países Bajos, Akersloot
40.000 kg
Países Bajos, Akersloot
30.000 kg
Países Bajos, Akersloot
2.500 kg
Países Bajos, Akersloot
60.000 kg
Países Bajos, Akersloot
40.000 kg
Países Bajos, Akersloot
40.000 kg
Países Bajos, Akersloot
Países Bajos, Akersloot
Países Bajos, Akersloot
Países Bajos, Hoensbroek
Portugal, Ramalhal
Polonia, Ligota
Turquía, Bursa
Capacity 60T airhydraulic jack for trucks
4-stage jack 60T - 30T - 22T - 11T
Lifting height 15 - 51.3 cm
Model Long chassis - Long bar
Weight - Total length 66 kg - 225 cm
Application Intensive commercial use
Delivery includes Extensions 75 + 45 mm
Hydraulic oil is filled
Long chassis - Long bar
Pneumatic hydraulic jack for the safe lifting of trucks, trailers, commercial vehicles, buses, construction and earth moving equipment, industrial machines, agricultural vehicles and forklift trucks.
With a minimum height of just 15 cm, almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up.With a maximum jacking height over 51 cm, vehicles with high axles can be raised.
TyreON TPH60T-4 Pneumatic hydraulic jack 60 ton
Air hydraulic floor jack with 4 heavy-duty pistons rated for a maximum of 60 Tons.
This four-stage 60T-40T-22T-11T hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 60 Tonne.
TyreON jacks are easy to operate and are featured with many safety options as dead man’s joystick which also aids controlled lowering speed.
Technology - Quality - Pneumatic hydraulic jack
Quality jack with two large rubber wheels and a long handle with soft rubber grips
First-class powder coating on entire construction, attractive and functional
Minimum jacking height 15 cm and a narrow profile
Operates with reliable hold-to-run joystick
Shortcut for quick (de)coupling of the air hose
The jack can be moved, manoeuvred, raised and dropped using the handle
The handle can be locked in 3 positions; 45º-90º-180º
The TPH60T-4 has a 222.5 cm long reach
High load stability with wide base
The robust chassis is made from 4.5 mm steel plate and provides ultimate protection of the internal parts
Internal and external hard-chrome cylinders resistant to wear and corrosion
Each cylinder is fitted with two seals to prevent any oil loss
Fast lifting by means of pneumatic high-pressure pump
2 hooks on the side of the chassis for the extensions
A hinged clamp on the chassis
Screw cap on the chassis for easy oil change
Comes with 2 extensions to close gap between the saddle of the jack and the jacking point
Pneumatic hydraulic jack intended for frequent commercial use
TyreON pneumatic hydraulic jacks are used by garages, workshops, tire services and trade, fleet owners, truck dealers, truck maintenance and (mobile) services, transport companies and the agricultural, heavy machinery and groundwork sectors.
The durable heavy duty jacks are designed and made for intensive professional use.
With the sturdy construction and the application of very thick sheet steel, the TPH60T-4 is highly resilient.
Thanks to the process control, the applied technologies and quality materials, these truck jacks have a long lifespan.
When the hold-to-run joystick is released, the workshop jack turns off and stops immediately.
This dead man's operation promotes safe working.
The workshop jack can be used both indoors and outdoors under severe conditions and is also safe to use on a surface that is slightly inclined.
Metal shrinks or expands with variations of temperature. A TyreON workshop jack will not fail at extremely low or high temperatures.
During each step of the production process, the Quality Centre critically examines quality and performs process control.
For example, the workshop jack was tested at -25 °C to + 45 °C and static and dynamic off-centre load tests were conducted to ensure safe operation.
CE approved, meets all current requirements;
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Move-able Jacks
Functionality - Pneumatic hydraulic jack 60 ton
An overpressure valve prevents damage from excessive loads.
The TyreON TPH60T-4 is fitted with a system that allows the lifting cylinders to be raised to the jacking point quickly and then also to be dropped rapidly once without load.
The non-return valves guarantee a locked position for loads at any height and a controlled even high lift rate under load.
A reduction valve ensures equalized and smooth descent, even with the heaviest of loads.
As the hose, cylinder and oil reservoir are interlinked, the oil circulates and cannot be released, even if the jack should be positioned on its side.
The techniques and possibilities of the TyreON TPH60T-4 pneumatic hydraulic jack
The final test - the warranty and TyreCare
Every pneumatic hydraulic jack is fully tested at the factory before being packed along with its documentation, ready for dispatch!
The extra low jacks are delivered with a one year warranty.
TyreCARE means that even after the warranty period expires, we stand ready to assist you with technical support and information.
Various models in stock
TPH60T-4 Air hydraulic jack 60 Tons - Minimum height 15 cm