Biesse Stream B1 / 10.5 + PRS EVO chapadora de cantos

Stream B1 / 10.5 edgebander + EVO Panelreturn system (incl. AirForce hotair)
(New price of this machine approx. € 600.000!)

Description
Single-sided edgebander STREAM B1/10.5
NC Y AXIS FOR FEEDER GUIDE
INFEED SQUARING DEVICE
KIT FOR MANUAL PANEL FEEDING ON LENGTHWISE RUN
KIT FOR AUTOMATIC PANEL OUTFEEDING ON LENGTHWISE AND CROSSWISE RUNCod. N0000476 required.
KIT FOR PANEL SUPPORT STREAM B IN LINE, CROSSWISE RUN
PANEL OVERHANG 40 MM
IN-LINE MACHINE KIT FOR STREAM BCod. N0001362 required.
FINE TUNING MODEThis mode allows to fine tune only static units with one cabin open, whilst the machine is running, without stopping the production. The individual cabin is unlocked through safety key. It is required when the machine is in line.
GREEN FUNCTION FOR STREAM B
SPRAYING LIQUID APPLICATION UNIT
ANTIADHESIVE LIQUID
PRE-MILLING UNIT RT30Asymmetrical diamond tools included:125x43 on STREAM B for maximum panel of H=40 mm.
NC ADJUSTMENT OF MATERIAL REMOVAL FOR RT30Only with cod. N0000015 or N0000657.
SUPPLEMENT PAIR OF ASYMMETRIC DIAMOND MILLING CUTTERS FOR H=60 ON RT UNITNot compatible with postformed panels.
GLUING UNIT SP20The reading of High Gloss edges is guaranteed ONLY if protected by a protective film.
Z AXIS FOR EDGE GUIDE DEVICE ON SP10, SP20, SP30
6 POSITIONS EDGEBANDING CONTAINER FOR SP10, SP20, SP30, SP40
NITROGEN TANK FOR GLUING HEAD FOR PUR GLUE
PURBlue 4 POLYURETHANE GLUE KIT IN PLACE OF EVA SYSTEM FOR STREAM B/B MDS/C BD2
END TRIMMING UNIT IT90-PTools included.
KIT FOR SOLID WOOD EDGES UP TO THICKNESS 20 MM FOR IT90-P
KIT 3 PNEUMATIC POSITIONS FOR IT90
ROUGH MILLING UNIT RS10
PRO-NESTING KIT FOR RS10
PAIR OF WIDIA MILLING CUTTERS FOR RS10 L=25
FINE TRIMMING UNIT RF40
PAIR OF WIDIA MILLING CUTTERS FOR RF30/RF40 BEVEL 25° - R=1/1.5/2
PRO-NESTING KIT FOR RF
COUNTER COPIER FOR RF UNITS
SPRAYING LIQUID APPLICATION UNIT
REMOVING/SLIDING LIQUID
MULTIFUNCTION CORNER ROUNDING UNIT AR30
PAIR OF WIDIA MILLING CUTTERS FOR AR30, R=2 MM
UNIVERSAL MILLING UNIT FB30 FW
UNIVERSAL MILLING UNIT FB30 FW
UNIVERSAL MILLING UNIT FB40 FW
DIVIDING PANEL FOR DUST PROTECTION
DIVIDING PANEL FOR DUST PROTECTION AFTER MILLING UNIT
PANELS CLEANING DEVICE
EDGE SCRAPER UNIT RB40
COUNTER COPIER FOR RB30, RB40, RB50
PRO-NESTING KIT FOR RB30, RB40, RB50
PAIR OF MULTIPROFILE CUTTERS FOR RB30/RB40, BEVEL 25° - R=1/1.5/2
GLUE SCRAPER UNIT RC20
SPRAYING LIQUID APPLICATION UNIT
CLEANING LIQUID
SUPERIMPOSED OSCILLATING BRUSHING UNIT SZ30
HOT AIR BLOWER UNIT PH10
MANUAL BAR-CODE READER
INDEPENDENT UNITS CONTROL SOFTWARECompatible ONLY with Electrospindle milling unit EB60.

SPECIAL EXECUTION
EXTERNAL MOBILE CONTROL PC
SUPERVISOR SOFTWARE FOR STREAM B MDS 1.1 (MANUAL READER INCLUDED)
SPECIAL AIR TABLE AT THE INFEED STREAM B1 WITH PANEL RETURN SYSTEM PRS EVO
ADDITIONAL MONITOR FOR PANEL RECYCLING INSTRUCTIONS
AIRFORCE SYSTEM - P4
INDEPENDENT PNEUMATIC EXCLUSION FOR GLUE SCRAPER UNIT RC20
2 Y AXIS FOR SOFTFORMING MILLING UNIT FP30/EP30

SPECIAL RETURN SYSTEM PRS EVO 3.2 FOR STREAM B1/10.5 IN PLACE OF THE STANDARD ONE
MESH GUARDS FOR PANEL RETURN SYSTEM PRS EVO


(All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!)
(Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!)

Best woodworkingmachines from the Netherlands Holland
Die besten holzbearbeitungsmaschinen aus die Niederlande
De beste gebruikte machines uit Nederland